1.1 PRECAUTIONS

• The Sense-U Baby monitor is not a medical device so it is not intended to prevent or monitor a disease, or condition such as Obstructive Apnea.
• Clip Sense-U Baby onto snug fit sleepwear (diaper/pants/etc), right next to belly button, with baby silkscreen in the same direction as your baby to avoid false breathing alarm and wrong position readings.
• One Sense-U Baby monitor can only connect to one smart device at any one time. An optional Sense-U base station supports multiples and keeps baby devices online all the time.
• To avoid disconnection issue, make sure the Sense-U app is running in foreground before you lock the screen and go to sleep.
• Bluetooth of your smart device needs to turn on to connect. Note: For Android phones, please make sure Location is enabled for the Sense-U App in Settings->Connections->Location, and Settings->Apps->Sense-U Baby->Permissions. Or else it may not be able to pair to the device. 
• To receive audible alarms on your smartphone, notifications need to switch on for the Sense-U app in Settings->Notifications->Sense-U Baby. For Android device, make sure Media Volume is switched on in Settings->Sounds and vibration->Volume. Make sure your smartphone is not in Do Not Disturb
• Movement from external sources such as a rocking bassinet or travelling in a vehicle may be detected by Sense-U Baby’s device. Sense-U Baby should not be relied upon where external sources of movement are present.
• The monitored baby must sleep in his/her own separate bed as the monitor may detect the abdominal movement of any other person sharing the bed with the baby, and will not alarm as long as it detects movement.

1.2 FITTING GUIDE

• Important: Snug fit sleepwear(diaper/pants/etc) is essential for the operation of the Sense-U Baby. The sleepwear should fit snugly on the baby with the Sense-U baby device clipped around belly button. Make sure baby silkscreen on the device is in the same direction as baby's body position to avoid wrong position readings.

• Loose fitting sleepwear may cause the monitor to lose contact with the baby and false alarm. If baby sleeps on their side or stomach, the Sense-U Baby should be placed off-center of the navel and the mattress. (Snug fit sleepwear is important to avoid false alarms.)        

 

 

2 INTRODUCTION

2.1 INTENDED USE

The Sense-U Baby is a wearable baby monitor which safely and conveniently monitors your baby’s abdominal breathing, sleeping position, temperature while sleeping and sends audible alarms to your paired smartphone when something happens.

2.2 USAGE ENVIRONMENT

• The Sense-U Baby is not suitable for co-sleeping or bed sharing.

2.3 PARTS IDENTIFICATION

1. Device
2. Temperature Tip: Measure feeling temperature around the belly
3. Clip Accessory

3 OPERATION

3.1 PAIRING WITH YOUR SMART DEVICE

Download the free Sense-U App for iOS and Android, register a free Sense-U account, and pair to your Sense-U device following the instructions in the app.

* Bluetooth of your smart device needs to turn on to connect. For Android phones, please make sure Location is enabled for the Sense-U App in Settings->Connections->Location and Settings->Apps->Sense-U Baby->Permissions. Or else it may not be able to pair to the device.

* To pair to another smartphone, you need to log out the Sense-U app on the paired smartphone first.

* The communication distance is up to 50ft (15m) in open space. Firewall or obstacles in between may affect the distance dramatically.

3.2 FITTING YOUR SENSE-U DEVICE

Snap the Sense-U baby monitor into the ring of the clip accessory, then attach the clip accessory onto diaper to the full extent of the clip. Make sure the Sense-U baby monitor is close to baby’s tummy around the belly button area, and the baby silkscreen is in the same direction as baby's body position to avoid false breathing alarms and wrong sleeping position readings.

 

To remove the Sense-U baby device from the ring accessory, please hold the ring and only push from the back of the baby device, as shown below. 
* Avoid bending the tip of the ring accessory which may break the ring.

3.3 SENSE-U APP AT A GLANCE

Home Screen

1. Movement Reading

• < 5/min: weak movement detected
• --(dash): stronger movement than normal abdominal movement detected

* Movement alert needs to switch on in Sense-U App->Setup->Manage Alerts.

2. Sleep Position: Back/Stomach/Left/Right
3. Temperature: Measure feeling temperature around the belly
4. Setup Menu
5. Alerts On/Off Button

• On: All baby alerts are switched on
• Off: All baby alerts are switched off, enter power-saving mode.

Manage Alerts

1. Device Name: please name your device
2. Baby Alerts Settings

• On/Off: Breathing alert needs to switch on to enable breathing reading and breathing alert.
• Activation Period: Increase this period from 15 up to 35 seconds for different breathing pattern.

      3.Schedule

• Set schedules to make each device run according to your daily habits.

      4. Movement Alert Settings

• On/Off: Movement alert needs to switch on to enable movement reading and movement alert.
• Activation Period: Adjust this period for different movement patterns.

      5. Rollover Alert Setting

      6. Temperature Alert Settings

• Recommended Value: Measured temperature +/- 3°C or 6°F

      7. Temperature Units: Fahrenheit / Celsius

      8. Temperature Drop Alert Settings

• Recommended Value: 3°C or 6°F
  

* To receive audible alarms, notifications need to switch on for the Sense-U app in Settings->Notifications->Sense-U Baby. For Android device, make sure Media Volume is switched on in Settings->Sounds and vibration ->Volume. Make sure your smartphone is not in Do Not Disturb mode.

3.4 ALERTS ON/OFF BUTTON

The Sense-U Baby can be switched on and off directly from the App while your baby is not sleeping (such as while breast feeding, changing the baby’s diaper, tummy time, etc). It provides you the convenience of preventing false alarms and saving power by switching the device to ultra-low power mode.

3.5 INDICATOR LIGHTS